EGGER OSB HDX is a heavy duty, load bearing OSB4 panel suitable for use in humid environments. It has a tongue and groove profile on the 2 long edges.
It is an idea solution for heavy duty load bearing environments such as mezzanine flooring, racking, shelving, working platforms and decking, where P5 or P6 38mm particleboard would typically be used. It is laid the same way as 38mm particleboard. However, due to being only 30mm thick, EGGER OSB HDX is around 20% lighter, making it easier to manoeuvre and quicker to lay.
|
Simple, easy solution that technically outperforms a 38mm chipboard equivalent |
|
11% wider and up to 20% lighter than 38mm chipboard panels |
|
Less likely than 38mm P6 to pick up moisture |
|
Stronger and stiffer |
|
Higher point loads and UDL’s |
|
Quicker and easier to lay |
|
PEFC™ certified |
|
No minimum order |
|
Available ex-stock |
Mezzanine flooring
Racking
Shelving
Working platforms and decking
Warehouses
Industrial/commercial floors
Boards are manufactured according to EN 300/EN 13986 for heavy duty load bearing purposes, in humid conditions. Total PMDI (formaldehyde free) glued, emission class- E1, tested according to the valid EN standards.
Please refer to the relevant documents for further information.
Edging
Melamine
Worktops
Laminate
PEFC™ Certified Flooring OSB HDX TG2